Global Home Semiconductors > Microcomputer Technical Support > Support > On-Board Debugging Environment (Debugging Environment , ProgrammingTool) > PanaX EX (Debugging Environment , Programmer) > Package Contents

Package Contents

Package contents of PanaX EX
To confirm the package contents of PanaX NEO onboard debugger, select your debug tool information below.
PanaX EX On-board debugger package has Standard IO models and Isolated IO models.
PanaX EX2 is preparing for a package containing AC adapter.
Before, we sale only DWire 10 pin cable set, but we sale DWire 14 pin cable set. All packages include a USB cable.
Unit type EX1 EX2
I/O Standard IO model Isolated IO model
Connecting Cable DWire 10 pin cable DWire 14 pin cable
AC adapter Without With
Package number Select package contents and click [Display package number] to display the package number.
Click the displayed package number to confirm the contents.
Please order by package number.
PanaX EX1
If You Are always connected to a host computer, please select when to suppress low cost of deployment.
-
Standard IO model
Standard IO model is +3.3 V / +5.0 V power supply output of the target board is available.
However, +5.0 V power supply output is not stabilized. the programming in mass production require careful use.(In that case PanaX EX2 recommended standard IO model.)
-
Isolated IO model
Isolated IO model is connected to the isolation between the host PC and target board.
Please use Isolated IO model, if you need to separate the power system such as inverter solutions.
Isolated IO model is the normal target board can be used.
PanaX EX2
Please choose when you need a stand-alone operation.
If you use a host computer connected to operate as PanaX EX1.
-
Isolated IO model
Standard IO model is +3.3 V / +5.0 V power supply output of the target board is available.
+3.3 V / +5.0V power output is stabilized within the unit, flash program features can be used in production.
If there is sufficient power on the target board, power supply from target board (+3.0 V to +5.5 V) is also possible to operate the unit.
-
Isolated IO model
Isolated IO model is connected to the isolation between the host PC and target board.
Stand-alone operation is connected to the isolation between the AC adapter and the target board.
Please use Isolated IO model, if you need to separate the power system such as inverter solutions.
Isolated IO model is the normal target board can be used.
Connecting Cable
DWire10 Connecting Cable
Use a pin header or a box type connector (male) for the connector.
The connector is restricted to a male general-purpose 10-pin pin header or box type connector (The manufacturer does not matter as long as there are two rows of five pins each, the pins are 2.54 mm apart, and the pins are 5 to 6 mm long).
DWire14 Connecting Cable
Use a pin header or a box type connector (male) for the connector.
The connector is restricted to a male general-purpose 14-pin pin header or box type connector (The manufacturer does not matter as long as there are two rows of seven pins each, the pins are 2.54 mm apart, and the pins are 5 to 6 mm long).
JTAG16 Connecting Cable(Optional Products)
Use a pin header or a box type connector (male) for the connector.
The connector is restricted to a male general-purpose 16-pin pin header or box type connector (The manufacturer does not matter as long as there are two rows of eight pins each, the pins are 2.54 mm apart, and the pins are 5 to 6 mm long).
DWire/JTAG FL Connecting Cable(Optional Products)
Use a surface mount connectors or small footprint for the connector.
Socket type Tokyo Eletech Corporation's SICA2P20S
Drawing of SICAP20S PDF 59.1.KB
DWire/JTAG Connecting Board(Optional Products)
In the PanaX EX series, an optional board to customize it to use environment is prepared.
For the PanaX EX series and the connection using a cable and the connector out of the designation using this.
Note : When an optional board is used, the PanaX EX series product is out of the guarantee.
Every phenomenon that occurred by using the optiona board is not guaranteed.
Customize it by the responsibility of the customer.
Optional Products
For inquiries regarding common options, contact us from our [Semiconductor Support System] page.

Return to Top

Global Home Semiconductors > Microcomputer Technical Support > Support > On-Board Debugging Environment (Debugging Environment , ProgrammingTool) > PanaX EX (Debugging Environment , Programmer) > Package Contents

Before using our products