Global Home Semiconductors > Microcomputer Technical Support > Support > On-Board Debugging Environment (Debugging Environment , ProgrammingTool) > Comparison with EX ,SP and NEO

Comparison with EX ,SP and NEO

Comparison with EX ,SP and NEO
PanaX NEO PanaX EX1 PanaX EX2 PanaX SP
Standard Isolated Standard Isolated
Supported products
(Debug IF)
MN103S/H, MN103E, MN2xx etc (DWire32A/JTAG) MN101C/E/L, MN103L/S/H (DWire8/ DWire13L/ DWire32L/ DWire32A)
(*1)
Device display LED-3 LED - 2 LCD (2 rows x 16 characters each)、LED - 2 LED - 3
Isolation from target Only isolated adapter
(Option)
- Support - Support -
Operating switches Puch switch None Puch switch - 2 Puch switch /
Slide switch
Target I/O voltage DWire32A used:
+2.5 V to +5.0 V
/ JTAG used:
+1.8 V to +3.3 V
/ Trace Unit used:
+1.8 V to +3.3 V
1.65 to 5.5V
(*2)
2.7 to 5.5V
(*2)
1.65 to 5.5V
(*2)
2.7 to 5.5V
(*2)
1.65 to 5.5V
(*3)
Target power supply current consumption (Max) 5.0V 10mA and under 15mA(*4) 30mA(*4) 15mA(*4)
/110mA(*5)
/130mA(*6)
30mA(*4) 5mA(*4)
/30mA(*5)
3.3V 10mA(*4) 25mA(*4) 10mA(*4)
/160mA(*5)
/200mA(*6)
25mA(*4)
Target voltage error detection Only isolated adapter
(Option)
Support -
Target power supply - 3.3V/5V
Max 200mA
- 3.3V/5V
Max 200mA
- 5V
Max 200mA
Debugger DebugFactory Builder Unsupported
Programmer Unsupported PanaX EX Commander
Device power supply AC Adapter dedicated USB bus power USB bus
power、
Target power
USB bus
power
USB bus
power、
Target power
Programming Support for mass-production writing - Support(a writing on production line is supported for built-in non-volatile memory of AM microcomputers)
Stand-alone writing - Support
Number of registered data types /
Maximum size
- 16/1GB 1/1MB
Debug Debug function Incorporated in the device depends on the debugging -
Trace Support -
Multi core Possible to display the window for debugging of each core and to debug. Target one core can only debug. -
Others limit - Products of MN103S/H, when the external reset is on,
it does not allow you to continue debugging.
-
Host OS Windows 8 (32bit/64bit OS)
Windows 10 (32bit/64bit OS)
Host interface USB1.1 Full Speed / USB2.0 High Speed USB1.1/2.0 Full Speed
*1:There are the microcomputers that are not supported in PanaX SP.
  For more details, please contact the semiconductor support system on our website.
*2:When the power supply from the target board is less than +3.0 V, the power supply from the USB connector of PanaX SP is required.
*3:When the power supply from the target board is less than +2.8 V, the power supply from the USB connector of PanaX SP is required.
*4:Uses USB bus power / AC adapter.   *5:With target power supply operating (EX2 LCD off).
*6:With target power supply operating (EX2 LCD on).

Return to Top

Global Home Semiconductors > Microcomputer Technical Support > Support > On-Board Debugging Environment (Debugging Environment , ProgrammingTool) > Comparison with EX ,SP and NEO

Before using our products