Characteristic Viewer
Please read the following guidelines and precautions before using any product technical information on this website.
Requests and precautions concerning the use of our products, technical information, etc. posted on this website
The products described on this website were designed and manufactured for standard applications such as general electronics devices, office equipment, data and communications equipment, measuring instruments, household appliances and audio-video equipment.
For special applications in which quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention and anti-theft devices, and safety equipment), please use only after your company has sufficiently tested our products' suitability for that application.
Regardless of the application, when using our products in equipment for which high levels of safety and reliability are expected, please ensure that protection circuits, redundancy circuits, and other devices are installed for safety of equipment while evaluating the application by independently conducting safety tests.
Please note that products and product specifications posted on this website are subject to change without notice for improvement purposes. Regardless of the application, please confirm the latest information and specifications prior to the final design phase, purchase, or use.
The technical information on this website provides examples of the products' typical operations and application circuits. It is not intended to guarantee the non-infringement of or grant license for intellectual property rights of this company or any third party.
If any of the products, products specifications and technical information on this website is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed.
The information contained on this website may not be reprinted or reproduced whether wholly or in part, without the prior written permission of Panasonic Corporation."
Tools and programs provided on this website shall be used at your sole discretion. Panasonic will not guarantee any results from the use of these tools and programs and will assume no responsibility for any losses resulting from your use.
<about Letter for the Certificate of Compliance to EU RoHS Directive>
The switchover date to RoHS compliant product varies depending on part number or series.
When using the inventory which is unclear about RoHS compliance, please select "Sales inquiry"
in web inquiry form.
Back to menu
Common Mode Noise Filters
Component selection
To characteristic graph
To graph display component
60hits
Type
Please select
2 Mode Single
Common Mode Array
Common Mode Single
Series
Please select
CB
CE
CF
CG
CH
CK
CN
CP
CT
CX
CZ
Part number
Impedance [Ω]
1000
4
>=
Ω
<=
Ω
Tolerance [%]
DC resistance [Ω]
7
0
>=
Ω
<=
Ω
Size [mm (inch)]
Please select
0605(0202)
0806(0302)
0906(0403)
1210(0504)
1608(0603)
2010(0804)
2012(0805)
Reset Conditions
2 Mode Single
CB
EXC24CB102U
1000
±25%
1.5
1210(0504)
Select
2 Mode Single
CB
EXC24CB221U
220
±25%
0.7
1210(0504)
Select
Common Mode Single
CE
EXC14CE121U
120
±20%
3.8
0806(0302)
Select
Common Mode Single
CE
EXC14CE650U
65
±20%
2.5
0806(0302)
Select
Common Mode Single
CE
EXC14CE900U
90
±20%
2.5
0806(0302)
Select
Common Mode Array
CE
EXC18CE201U
200
±20%
3.5
1608(0603)
Select
Common Mode Array
CE
EXC18CE650U
65
±20%
1.8
1608(0603)
Select
Common Mode Array
CE
EXC18CE900U
90
±20%
2
1608(0603)
Select
Common Mode Single
CE
EXC24CE121U
120
±25%
2.2
1210(0504)
Select
Common Mode Single
CE
EXC24CE201U
200
±25%
2.7
1210(0504)
Select
Common Mode Single
CE
EXC24CE331U
330
±25%
6.2
1210(0504)
Select
Common Mode Single
CE
EXC24CE360UP
36
±25%
1
1210(0504)
Select
Common Mode Single
CE
EXC24CE900U
90
±25%
1.75
1210(0504)
Select
Common Mode Array
CE
EXC28CE121U
120
±25%
2
2010(0804)
Select
Common Mode Array
CE
EXC28CE201U
200
±25%
2.5
2010(0804)
Select
Common Mode Array
CE
EXC28CE900U
90
±25%
1.5
2010(0804)
Select
Common Mode Single
CE
EXC34CE121U
120
±25%
1
2012(0805)
Select
Common Mode Single
CE
EXC34CE201U
200
±25%
1
2012(0805)
Select
Common Mode Single
CE
EXC34CE670U
67
±25%
0.8
2012(0805)
Select
Common Mode Single
CE
EXC34CE900U
90
±25%
0.8
2012(0805)
Select
Common Mode Single
CE
EXCX4CE600U
60
±20%
2.4
0605(0202)
Select
Common Mode Single
CE
EXCX4CE900U
90
±20%
3
0605(0202)
Select
Common Mode Single
CF
EXC24CF900U
90
±25%
2.5
1210(0504)
Select
Common Mode Single
CG
EXC14CG120U
12
±30%
2
0806(0302)
Select
Common Mode Single
CG
EXC14CG350U
35
±30%
2
0806(0302)
Select
Common Mode Single
CG
EXC14CG430U
43
±25%
2.7
0806(0302)
Select
Common Mode Array
CG
EXC18CG430U
43
±25%
2.7
1608(0603)
Select
Common Mode Single
CG
EXC24CG240U
24
±25%
1.5
1210(0504)
Select
Common Mode Single
CG
EXC24CG360U
36
±25%
1.7
1210(0504)
Select
Common Mode Single
CG
EXC24CG900U
90
±25%
3
1210(0504)
Select
Common Mode Array
CG
EXC28CG240U
24
±25%
1.5
2010(0804)
Select
Common Mode Array
CG
EXC28CG900U
90
±25%
3
2010(0804)
Select
Common Mode Single
CG
EXC34CG900U
90
±25%
3
2012(0805)
Select
Common Mode Single
CH
EXC14CH120U
12
±25%
1
0806(0302)
Select
Common Mode Single
CH
EXC14CH350U
35
±30%
1.5
0806(0302)
Select
Common Mode Single
CH
EXC24CH500U
50
±25%
1.5
1210(0504)
Select
Common Mode Single
CH
EXC24CH500UR
50
±25%
1.5
1210(0504)
Select
Common Mode Single
CH
EXC24CH900U
90
±20%
2.5
1210(0504)
Select
Common Mode Single
CH
EXC24CH900UR
90
±20%
2.5
1210(0504)
Select
Common Mode Array
CH
EXC28CH500U
50
±25%
1.5
2010(0804)
Select
Common Mode Array
CH
EXC28CH900U
90
±20%
2.5
2010(0804)
Select
Common Mode Single
CH
EXCX4CH120X
12
±5Ω
2
0605(0202)
Select
Common Mode Single
CH
EXCX4CH350X
35
±30%
2.7
0605(0202)
Select
Common Mode Single
CK
EXC24CK350U
35
±30%
1.5
1210(0504)
Select
2 Mode Single
CN
EXC24CN601X
600
±25%
0.9
1210(0504)
Select
2 Mode Single
CP
EXC14CP121U
120
±30%
0.5
0806(0302)
Select
2 Mode Single
CP
EXC14CP221U
220
±30%
0.7
0806(0302)
Select
2 Mode Single
CP
EXC24CP121U
120
±25%
0.3
1210(0504)
Select
2 Mode Single
CP
EXC24CP221U
220
±25%
0.4
1210(0504)
Select
Common Mode Single
CT
EXC14CT500U
50
±25%
3
0806(0302)
Select
Common Mode Single
CT
EXC14CT900U
90
±20%
4.3
0806(0302)
Select
Common Mode Single
CT
EXC16CT250U
25
±25%
3
0906(0403)
Select
Common Mode Single
CT
EXC16CT350U
35
±30%
4
0906(0403)
Select
Common Mode Single
CT
EXCX4CT650X
65
±20%
2.7
0605(0202)
Select
Common Mode Single
CT
EXCX4CT900X
90
±20%
3
0605(0202)
Select
Common Mode Single
CX
EXC14CX280U
28
±25%
3
0806(0302)
Select
Common Mode Single
CX
EXC14CX400U
40
±25%
4
0806(0302)
Select
Common Mode Single
CZ
EXCX4CZ040X
4
±2Ω
1
0605(0202)
Select
Common Mode Single
CZ
EXCX4CZ090X
9
±3Ω
1.9
0605(0202)
Select
Common Mode Single
CZ
EXCX4CZ200X
20
±30%
3
0605(0202)
Select
Graph display component
To characteristic graph
To component selection
No.
Type
Series
Part number
Impedance [Ω]
Tolerance [%]
DC resistance [Ω]
Size [mm (inch)]
Simulation model
Graph display ON
ZoomGraph
Characteristic graph
To graph display component
To component selection
Display item:
Bulk selection
Zcom
Zdif
Scc21
Sdd21
Sdd11
Sdd22
Data download(xlsx)
Zoom
Setting
Zcom
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Reset
OK
Zoom
Setting
Zdif
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Reset
OK
Zoom
Setting
Scc21
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Auto Range
Minimum Value
Maximum Value
Reset
OK
Zoom
Setting
Sdd21
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Auto Range
Minimum Value
Maximum Value
Reset
OK
Zoom
Setting
Sdd11
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Auto Range
Minimum Value
Maximum Value
Reset
OK
Zoom
Setting
Sdd22
X Axis
Linear
Log
Auto Range
Minimum Value
Maximum Value
Y Axis
Auto Range
Minimum Value
Maximum Value
Reset
OK